Scsi Controller Is Not Installed
'SCSI controller is not installed' error message while starting Windows virtual machine Symptoms While starting Windows virtual machine you see the black screen and. 'SCSI controller is not installed' error message while starting Windows virtual machine Symptoms While starting Windows virtual machine you see the black screen and.
Hello i'm trying to install/upgrade to windows 7 from vista 64bit and am getting the following warning These devices might not work properly after the upgrade. Before upgrading, we recommend updating the drivers for these devices. Cancel the upgrade, open Control Panel and search for 'update device drivers', or go to the device manufacturer's website to search for updated drivers. Storage controllers: SCSI/RAID Host Controller my machine is a dell studio xps, i've checked the drivers on the dell site but there's no updates for the scsi/riad driver, the driver i have installed at the moment seems to be from microsoft and is version 6.0.6001.18034(vistasp1gdr.0), anybody know where i can get an update from cheers.
I've successfully installed Ubuntu Server 14.04.1 LTS on the HP Microserver ProLiant Gen8. Before installing, I booted into the Intelligent Provisioning and set up a RAID 1 with two disks. During installation, I had to inject HP Dynamic Smart Array B120i controller drivers for the Ubuntu 3.13 kernel to see the logical RAID 1 volume (see launchpad.net/hp-iss-team/+archive/ubuntu/hp-storage). Now the system is up and running. In order to detect a disk failure in the future, I want to use the HP tool hpssacli.
But the tool states the following root@mail:/home/goodkat# hpssacli controller all show Error: No controllers detected. Possible causes: - The driver for the installed controller(s) is not loaded. On LINUX, the scsigeneric (sg) driver module is not loaded. See the README file for more details.
Scsi Controller Vmware
I've tried the following root@mail:/home/goodkat# lsmod grep hp hpilo 17381 0 shpchp 37032 0 root@mail:/home/goodkat# dpkg -s hpvsa Package: hpvsa Status: install ok installed Priority: standard Section: kernel Installed-Size: 26 Maintainer: Hewlett Packard Architecture: amd64 Version: 1.2.12-115-3.13tubuntu2 Provides: hpvsa Depends: hpvsa-3.13.0-32-generic (= 1.2.12-115-3.13tubuntu2) Description: Meta-package for installing the latest hpvsa drivers. Please put an extended description here (meta).
The driver seems to be installed. The scsigeneric is available too root@mail:/home/goodkat# cat /proc/scsi/sg/version 30534 3.5.34 20061027 modprobe sg does not help. The hpsscli supports the B120i controller as and this is an.
This is question is more appropriate for. But that said, why jump through hoops with tweaking the kernel to get that tool tweaked specifically for the HP Dynamic Smart Array B120i controller? Why not just use? The smartmontools package contains two utility programs (smartctl and smartd) to control and monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (SMART) built into most modern ATA and SCSI harddisks. In many cases, these utilities will provide advanced warning of disk degradation and failure. Just run sudo apt-get install smartmontools and then you can define devices in the config here /etc/smartd.conf to email an alert when an event happens.
The B120i is not a hardware RAID card, it is a software RAID product with a hardware component. It is not FakeRAID and not a bad design, so don't panic, but the issue is likely that you have not yet installed the 'drivers' (the drivers being the actual software RAID system) and so without them it has no idea that a RAID system even exists. Dealing with software RAID (even software RAID with an odd hardware component) is much different than true hardware RAID and so will require thinking about it differently. If the RAID is working and you simply cannot monitor it, you might need different tools as there is no RAID card to query.
